Changes

1. something that transmits something (in all senses)

1. something that transmits something (in all senses)

2. an electronic device that generates and amplifies a carrier wave, modulates it with a meaningful signal derived from speech, music, TV or other sources, and broadcasts the resulting signal from an antenna

2. an electronic device that generates and amplifies a carrier wave, modulates it with a meaningful signal derived from speech, music, TV or other sources, and broadcasts the resulting signal from an antenna [http://en.wiktionary.org/wiki/transmitter]

----

----

''More generally and in communications and information processing, a "transmitter" is any object (source) which sends information to an observer (receiver). When used in this more general sense, vocal cords may also be considered an example of a "transmitter".''

''More generally and in communications and information processing, a "transmitter" is any object (source) which sends information to an observer (receiver). When used in this more general sense, vocal cords may also be considered an example of a "transmitter".''

In industrial process control a "transmitter" is any device which converts measurements from a sensor into a signal to be received, usually sent via wires, by some display or control device located a distance away. Typically in process control applications the "transmitter" will output a 4-20 mA current loop or digital protocol to represent a measured variable within a range. For example, a pressure transmitter might use 4 ma as a representation for 50 psig of pressure and 20 ma as 1000 psig of pressure and any value in between proportionately ranged between 50 and 1000 psig. Older technology transmitters used pneumatic pressure typically ranged between 3 to 15 psig (20 to 100 kPa) to represent a process variable.

In industrial process control a "transmitter" is any device which converts measurements from a sensor into a signal to be received, usually sent via wires, by some display or control device located a distance away. Typically in process control applications the "transmitter" will output a 4-20 mA current loop or digital protocol to represent a measured variable within a range. For example, a pressure transmitter might use 4 ma as a representation for 50 psig of pressure and 20 ma as 1000 psig of pressure and any value in between proportionately ranged between 50 and 1000 psig. Older technology transmitters used pneumatic pressure typically ranged between 3 to 15 psig (20 to 100 kPa) to represent a process variable. [http://en.wikipedia.org/wiki/Transmitter]