Penetration

From Nordan Symposia
(Redirected from Penetrated)
Jump to navigationJump to search

Lighterstill.jpg

Penetration ingo cover.jpg

Origin

Middle French, French pénétration (1374 in sense ‘act of penetrating’, 1654 in sense ‘discernment’; also in Middle French as penetracion (c1377)) and its etymon classical Latin penetrātiōn-, penetrātiō action of piercing (2nd cent. in Apuleius), in post-classical Latin also action of understanding

Definitions

b : the depth to which something penetrates
c : the extent to which a commercial product or agency is familiar or sells in a market
b : an attack that penetrates the enemy's front or territory

Description

Penetration Depth is a measure of how deep light or any electromagnetic radiation can penetrate into a material. It is defined as the depth at which the intensity of the radiation inside the material falls to 1/e (about 37%) of its original value at (or more properly, just beneath) the surface.

When electromagnetic radiation is incident on the surface of a material, it may be (partly) reflected from that surface and there will be a field containing energy transmitted into the material. This electromagnetic field interacts with the atoms and electrons inside the material. Depending on the nature of the material, the electromagnetic field might travel very far into the material, or may die out very quickly. For a given material, penetration depth will generally be a function of wavelength.

According to Beer-Lambert law, the intensity of an electromagnetic wave inside a material falls off exponentially from the surface as

Penetration 1.jpg

If Penetration 2 2.jpg denotes the penetration depth, we have

Penetration 2.jpg

"Penetration depth" is but one term that describes the decay of electromagnetic waves inside a material. The above definition refers to the depth Penetration 2 2.jpg at which the intensity or power of the field decays to 1/e of its surface value. In many contexts one is concentrating on the field quantities themselves: the electric and magnetic fields in the case of electromagnetic waves. Since the power of a wave in a particular medium is proportional to the square of a field quantity, one may speak of a penetration depth at which the magnitude of the electric (or magnetic) field has decayed to 1/e of its surface value, and at which point the power of the wave has thereby decreased to 1esquared.jpg or about 13% of its surface value:

Penetration3b.jpg

Note that δe is identical to the skin depth, the latter term usually applying to metals in reference to the decay of electrical currents (which follow the decay in the electric or magnetic field due to a plane wave incident on a bulk conductor). The attenuation constant α / 2 is also identical to the (negative) real part of the propagation constant, which may also be referred to as α using a notation inconsistent with the above use. When referencing a source one must always be careful to note whether a number such as α or δ refers to the decay of the field itself, or of the intensity (power) associated with that field. It can also be ambiguous as to whether a positive number describes attenuation (reduction of the field) or gain; this is usually obvious from the context.

The attenuation constant for an electromagnetic wave at normal incidence on a material is also proportional to the imaginary part of the material's refractive index n. Using the above definition of α (based on intensity) the following relationship holds:

Penetration 3b.jpg

where Tilde n.jpg denotes the complex index of refraction, ω is the radian frequency of the radiation, and c is the speed of light in vacuum. Note that Nw.jpg is very much a function of frequency, as is its imaginary part which is often not mentioned (it is essentially zero for transparent dielectrics). The complex refractive index of metals is also infrequently mentioned but has the same signficance, leading to a penetration depth (or skin depth δe) accurately given by a formula which is valid up to microwave frequencies.

Relationships between these and other ways of specifying the decay of an electromagnetic field are further detailed in the article: Mathematical descriptions of opacity.[1]